This product can quickly remove the scale, rust, oil and other dirt in the boiler (including the boiler that uses sea water on ships), and can quickly remove the dirt on the inner wall of the boiler and make it look new. The boiler fouling will cause adverse effects and hazards, such as waste of fuel, damage to the heating surface, reduced boiler efficiency, and shortened boiler service life. Therefore, when the boiler becomes fouled, a safe and reasonable method should be used to remove the scale in time.
Product Features:
The descaling effect is good and the material is safe.
Operation is safe, convenient and economical-it can be diluted 10 times and used.
It can effectively remove carbonate scale, sulfate scale, silicate scale, iron scale, mud scale and mixed scale.
Technical indicators: PH value: 1; proportion: 1.1 (±0.05);
Appearance: uniform and transparent liquid;
Odor: with the inherent odor of this product, no peculiar smell;
Color: red;
Total active matter: ≥40%;
Corrosion and rust resistance test: qualified.
Ignition point: non-combustible;
Evaporation speed: the same as water;
Packing: 25kg/drum (plastic drum).
Scope of application:
It is suitable for the descaling and cleaning of various vertical boilers, horizontal boilers, high pressure boilers, low pressure boilers, ultra-high pressure boilers and subcritical boilers.
Instructions:
Soaking method: generally used in vertical boilers and equipment that has no circulation conditions and is relatively loose in scale.
Circulation type: Most boiler equipment can be cleaned in circulation. It is to use acid-resistant pump, acid-resistant tank and acid-resistant hose to form a closed loop system with the equipment to be cleaned. The circulation method is to improve the cleaning effect and shorten the cleaning time through the combination of physical and chemical effects.
Precautions:
After cleaning, the waste liquid should be drained in time, and the waste liquid should not be stopped in the boiler for a long time.
If the scale is thicker, heating can be used to improve the cleaning ability, but the water temperature should not be higher than 95℃.
If the boiler is large, you can put it in a plastic bag and seal it after adding water to increase the utilization rate of the cleaning agent.
Language
