QR-138 can quickly remove all kinds of dirt such as carbon deposits, greasy dirt, caramelized sugar dirt and curing glue.

Product Features:

No need for manual external treatment, no heating-energy saving, convenient-can be used on site

For metal safety, there is no danger of fire.

Save time, usually soaking for 20 minutes to 2 hours.

The operation is simple, just soak it, and it can be used repeatedly, which is very economical.

Scope of application:

It is suitable for removing carbon deposits, grease, sludge, etc. on various types of engines and their parts (such as: pistons, fuel injectors, valves, cylinders and exhaust ducts, etc.).

Instructions:

Use a metal tank or bucket with a lid, lined with a decontamination net and a cleaning basket, and put the carbon-deposited parts into the lower layer of liquid (A liquid), and put the A liquid and B liquid in the same proportion, that is A and B liquids are blended at a ratio of 1:1, and liquid A can also be used for cleaning. Determine the best cleaning time according to the thickness and hardness of the carbon deposits of the parts. After removing it, use a certain pressure of water, solvent or compressed air to flush and blow it clean. Then apply protective grease as needed.

Precautions:

This product is very fatty, please do not touch the skin for a long time

It should not be stored for a long time after mixing A and B liquid

Packing: 20kg/barrel