1 application

This series of relays is a pluggable rail mounting base structure, used in various protection and automatic control circuits to increase the number of contacts in the protection and control circuits.

2. Model definition

3 main performance

3.1 Adopt high-performance sealed relay, moisture-proof, dust-proof, uninterrupted wire, high reliability.

3.2 The action voltage is accurate, no jitter, low power consumption, and multiple contacts act or return at the same time.

3.3 There will be indicator lights after the relay is activated.

3.4 The electrical and mechanical life of the relay is long.

3.5 High insulation withstand voltage level, large contact capacity and low contact resistance.

4 Technical conditions

4.1 Environmental reference conditions

Environment temperature: 20±2℃

Relative humidity: 45%～75%

Atmospheric pressure: 86～106Kpa

4.2 Normal use conditions

Ambient temperature: -10℃～+50℃

Relative humidity of environment: not more than 90%

Atmospheric pressure: 86～110Kpa

Limit temperature during storage and transportation: -25℃～+70℃

The altitude of the place of use: no more than 2500 meters

The surrounding medium of the use environment has no explosion hazard; it does not contain corrosive gas; the concentration of conductive dust contained should not reduce the insulation level below the allowable limit value.

4.3 Rated voltage: 48V, 110V, 220V AC and DC voltage is common.

The allowable fluctuation range of the power supply: 0.8～1.15 times the rated voltage.

4.4 Maximum capacity of contacts:

Cut-off load capacity: DC 250V or less, τ=5ms, inductive load 50W, resistive load 150W;

AC below 250V, load 1200VA;

Allow long-term connection current: 5A.

4.5 Maximum power consumption: no more than 2W under rated voltage 220VDC.

No more than 2VA under rated voltage 220VAC.

4.6 Insulation resistance: Use an open-circuit voltage 500V megger to measure the insulation resistance between the exposed non-charged metal parts or shells of the relays connected to each conductive terminal and should not be less than 10MΩ.

4.7 Insulation withstand voltage: each lead-out terminal to the housing locking screw can withstand a power frequency voltage of 2000V, and the same group of contacts can withstand a power frequency voltage of 1000V, which lasts for one minute without breakdown.

4.8 Anti-interference performance: Comply with the national GB6162-85 "Electrical interference test of static relays and protection devices" standard.

4.9 Electrical life: In the DC250V circuit, cut off the current τ=5ms, 50W, more than 104 times.

4.10 Mechanical life: The contact is 3 million times in no-load state.

5. Structure type (see the relay structure size diagram for details)

5.1 DZ-4 structure pluggable base terminal wiring diagram (subject to company product samples)

5.2 DZ-5 structure pluggable base terminal wiring diagram (subject to company product samples)

5.3 DZ-6 structure pluggable base terminal wiring diagram (subject to company product samples)

5.4 DZ-7 structure pluggable base terminal wiring diagram (subject to company product samples)

6 Use

Before energizing the relay, confirm whether the voltage level of the connected relay is consistent with the actual parameters, otherwise the relay may be damaged; check whether the relay is damaged during transportation and storage, and the relay screw fasteners should not be loose; if there are damaged parts, Please contact us to replace it for you.

7 Ordering instructions

When ordering, please indicate the relay model specification, quantity, structure, rated voltage and other requirements.